factory Outlets for Scaffolding Clamp - Ringlock Scaffolding System for Any Projects – Sampmax
factory Outlets for Scaffolding Clamp - Ringlock Scaffolding System for Any Projects – Sampmax Detail:
Due to its safety, beauty, material saving, high work efficiency, and fast construction speed, the ringlock scaffolding has become increasingly large in the market and has gradually gained unanimous approval from the contractors.
Main Components
The main accessories of ringlock scaffolding are Vertical standards, Horizontal ledger, diagonal brace, adjustable bases, adjustable brackets, zigzag stairs, hook planks, etc.
There are eight holes on the rosette, four small holes are dedicated for ledger, four large holes are dedicated for diagonal brace. The connection method of the horizontal and the diagonal is bolt type, which can ensure that the standards are firmly connected with the vertical rosettes.
The ledger, the diagonal brace, and the vertical steel pipe are in full-surface contact. After the bolt is tightened, the force is applied at three points (the upper and lower points of the joint and the one point of the bolt against the rosette) can be firmly fixed, increasing the structural strength and transmitting horizontal force. The clubhead and the steel tube body are fixed by full welding, and the power transmission is accurate.
Standards
| Models | Materials | Effective Length/M | Overall Length/M | Weight/KG |
| SMKS300 | Q345,48.3×3.25mm | 3.0 | 3.15 | 14.90 |
| SMKS250 | Q345,48.3×3.25mm | 2.5 | 2.65 | 12.45 |
| SMKS200 | Q345,48.3×3.25mm | 2.0 | 2.15 | 9.95 |
| SMKS150 | Q345,48.3×3.25mm | 1.5 | 1.65 | 7.50 |
| SMKS100 | Q345,48.3×3.25mm | 1.0 | 1.15 | 5.00 |
| SMKS050 | Q345,48.3×3.25mm | 0.5 | 0.65 | 2.50 |
Ledgers/Double Truss Ledgers
| Models | Materials | Effective Length/M | Overall Length/M | Weight/KG |
| SMKS307 | Q345,48.3×3.25mm | 3.07 | 3.00 | 12.90 |
| SMKS257 | Q345,48.3×3.25mm | 2.57 | 2.50 | 10.95 |
| SMKS207 | Q345,48.3×3.25mm | 2.07 | 2.00 | 8.95 |
| SMKS157 | Q345,48.3×3.25mm | 1.57 | 1.50 | 6.90 |
| SMKS140 | Q345,48.3×3.25mm | 1.47 | 1.40 | 6.22 |
| SMKS109 | Q345,48.3×3.25mm | 1.09 | 1.02 | 4.98 |
| SMKS104 | Q345,48.3×3.25mm | 1.04 | 0.97 | 4.55 |
| SMKS073 | Q345,48.3×3.25mm | 0.73 | 0.66 | 3.55 |
Diagonal Brace
| Models | Materials | Standard Spacing (Width)/M | Height/M | Weight/KG |
| SMKS307B | Q235,48.3×2.5mm | 3.07 | 2.00 | 12.68 |
| SMKS257B | Q235,48.3×2.5mm | 2.57 | 2.00 | 11.45 |
| SMKS207B | Q235,48.3×2.5mm | 2.07 | 2.00 | 10.30 |
| SMKS157B | Q235,48.3×2.5mm | 1.57 | 2.00 | 9.30 |
| SMKS140B | Q235,48.3×2.5mm | 1.47 | 2.00 | 9.00 |
| SMKS109B | Q235,48.3×2.5mm | 1.09 | 2.00 | 8.50 |
| SMKS104B | Q235,48.3×2.5mm | 1.04 | 2.00 | 8.30 |
| SMKS073B | Q235,48.3×2.5mm | 0.73 | 2.00 | 5.20 |
Steel Plank
| Models | Materials | Effective Length/M | Width/mm | Weight/KG |
| SMKS307P | 1.5 mm Pre-galvanized Steel Sheet | 3.07 | 240/320 | 23.20 |
| SMKS257P | 1.5 mm Pre-galvanized Steel Sheet | 2.57 | 240/320 | 19.42 |
| SMKS207P | 1.5 mm Pre-galvanized Steel Sheet | 2.07 | 240/320 | 16.25 |
| SMKS157P | 1.5 mm Pre-galvanized Steel Sheet | 1.57 | 240/320 | 12.35 |
| SMKS140P | 1.5 mm Pre-galvanized Steel Sheet | 1.47 | 240/320 | 11.40 |
| SMKS109P | 1.5 mm Pre-galvanized Steel Sheet | 1.09 | 240/320 | 9.25 |
| SMKS104P | 1.5 mm Pre-galvanized Steel Sheet | 1.04 | 240/320 | 8.00 |
| SMKS073B | 1.5 mm Pre-galvanized Steel Sheet | 0.73 | 240/320 | 6.80 |
Side Bracket/Board Bracket
| Models | Materials | Effective Length/mm | Match | Weight/KG |
| SMKS360S | Q235, 48.3mm Steel Tube | 360 | 1 board | 4.50 |
| SMKS390S | Q235, 48.3mm Steel Tube | 390 | 1 board | 4.65 |
| SMKS730S | Q235, 48.3mm Steel Tube | 730 | 2 boards | 6.00 |
| SMKS109S | Q235, 48.3mm Steel Tube | 1090 | 3 boards or ladder | 13.65 |
Ringlock Scaffolding Accessories
| Base Collar | 48.3×3.25mm Steel Tube, 0.43m/0.24m length, HDG |
| Screw Jack | Solid/Hollow, Cast Steel, HDG |
| Ladder | Electrical-Galvanized, Load Capacity 300kg |
| Steel Stair | Square tube and U profile, HDG |
| Access Ladder Bracket | 0.43m Width, 2.8kg |
Quality Management System: ISO9001-2000.
Tubes Standard: ASTM AA513-07.
Couplings Standard: BS1139 and EN74.2 standard.
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for factory Outlets for Scaffolding Clamp - Ringlock Scaffolding System for Any Projects – Sampmax , The product will supply to all over the world, such as: Mexico, Belize, Brazil, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we'll continue to develop, to deliver the high-quality items and services, and promote lasting cooperation with our customers, common development and create a better future.
By Brook from Florida - 2017.09.26 12:12
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Alice from Kuala Lumpur - 2018.05.22 12:13
