Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax


Product Detail

Product Tags

Related Video

Feedback (2)

With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Ring Lock Scaffolding, Screw Base Jack, Concrete Form Work, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.
Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax Detail:

Features
Size: 1250*2500
Thickness: 12mm 15mm 18mm
Core Veneer: Poplar Core, Eucalyptus Core, Combined
Face & Back: Phenolic Black Film, Phenolic Brown Film, Dynea Film
Glue: WBP/WBP Melamine/MR

Baseboard
Sampmax Construction Eucalyptus plywood made solely from eucalyptus veneers bonded together in a cross-banded construction.

Bonding
Phenolic resin cross-bonded weather-resistant gluing according to EN 314-2/class 3 exterior, EN636-3.

Surface
Sampmax FFP coating weight is 240g/m2 on both sides.
Face and reverse: Brown phenolic film combination (abt. RAL 8017).
Edge sealing: Water-resistant paint.

Thicknesses and weight

Nominal thickness

(mm)

Min. thickness

(mm)

Max. thickness

(mm)

Weight

(kg/m2)

15

11

14.5

15.2

18

13

17.5

18.5

21

15

20.5

21.5

Panel size
2400/2440/2500 x 1200/1220/1250 mm

Size limits
Size tolerances: < 1000 mm ± 1 mm
1000-2000 mm ± 2 mm
> 2000 mm ± 3 mm

Other information
The panel can have dimensional changes due to changes in air humidity.

Sampmax-construction-wall-formwork-plywood

End uses

Usage mainly for slab forms.

The typical number of reuses is likely to be about 6-10 times.

However, the number of reuses will depend on a wide range of factors including good site practice, the required concrete finish, careful handling & storage of forms, and the type and quality of release agent.

Data

Properties of Sampmax Poplar.

Property

EN

Unit

Standard value

Value of test

Moisture content

EN322

%

6 -14

8.60

Number of plies

-

Ply

-

5-13

Density

EN322

KG/M3

-

550

Bonding Quality

EN314-2/class3

Mpa

≥0.70

Max: 1.85

Min: 1.02

Longitudinal

Modulus of elasticity

EN310

Mpa

≥6000

7265

Lateral

Modulus of elasticity

EN310

Mpa

≥4500

5105

Longitudinal Strength Bending N/mm2

EN310

Mpa

≥45

63.5

Lateral Strength

Bending N/mm2

EN310

Mpa

≥30

50.6

Recommendations for use

Cover the panels to protect them from direct sunshine and rain.

Seal the cut edges and machining made at site with paint suitable for exterior use.

Use good quality form oil.

Seal screw holes with silicone to prevent moisture absorption.

Clean the panels carefully after every use.

Handle panels with care to get maximum reuses possible.

QC of Plywood

Sampmax Construction attaches great importance to the maintenance of product quality. Each piece of plywood is supervised by specialized personnel from the selection of raw materials, the specifications of glue, the layout of the core board, the high-pressure laminating veneers, the laminating process, including the selection of the finished product. Before large packaging and loading cabinets, our inspectors will check every piece of plywood to ensure that all products and processes are 100% qualified.


Product detail pictures:

Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax detail pictures


Related Product Guide:

abide by the contract", conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients' fulfillment for Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax , The product will supply to all over the world, such as: Canada, Comoros, Sao Paulo, Our technical expertise, customer-friendly service, and specialized merchandise make us/company name the first choice of customers and vendors. We've been looking for your inquiry. Let's set up the cooperation right now!
  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Lulu from Czech - 2017.07.28 15:46
    We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Dee Lopez from UAE - 2017.04.08 14:55
    Write your message here and send it to us