Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax


Product Detail

Product Tags

Related Video

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Column Forms, Curved Concrete Formwork, Stainless Steel Coil, We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.
Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax Detail:

Features
Size: 1250*2500
Thickness: 12mm 15mm 18mm
Core Veneer: Poplar Core, Eucalyptus Core, Combined
Face & Back: Phenolic Black Film, Phenolic Brown Film, Dynea Film
Glue: WBP/WBP Melamine/MR

Baseboard
Sampmax Construction Eucalyptus plywood made solely from eucalyptus veneers bonded together in a cross-banded construction.

Bonding
Phenolic resin cross-bonded weather-resistant gluing according to EN 314-2/class 3 exterior, EN636-3.

Surface
Sampmax FFP coating weight is 240g/m2 on both sides.
Face and reverse: Brown phenolic film combination (abt. RAL 8017).
Edge sealing: Water-resistant paint.

Thicknesses and weight

Nominal thickness

(mm)

Min. thickness

(mm)

Max. thickness

(mm)

Weight

(kg/m2)

15

11

14.5

15.2

18

13

17.5

18.5

21

15

20.5

21.5

Panel size
2400/2440/2500 x 1200/1220/1250 mm

Size limits
Size tolerances: < 1000 mm ± 1 mm
1000-2000 mm ± 2 mm
> 2000 mm ± 3 mm

Other information
The panel can have dimensional changes due to changes in air humidity.

Sampmax-construction-wall-formwork-plywood

End uses

Usage mainly for slab forms.

The typical number of reuses is likely to be about 6-10 times.

However, the number of reuses will depend on a wide range of factors including good site practice, the required concrete finish, careful handling & storage of forms, and the type and quality of release agent.

Data

Properties of Sampmax Poplar.

Property

EN

Unit

Standard value

Value of test

Moisture content

EN322

%

6 -14

8.60

Number of plies

-

Ply

-

5-13

Density

EN322

KG/M3

-

550

Bonding Quality

EN314-2/class3

Mpa

≥0.70

Max: 1.85

Min: 1.02

Longitudinal

Modulus of elasticity

EN310

Mpa

≥6000

7265

Lateral

Modulus of elasticity

EN310

Mpa

≥4500

5105

Longitudinal Strength Bending N/mm2

EN310

Mpa

≥45

63.5

Lateral Strength

Bending N/mm2

EN310

Mpa

≥30

50.6

Recommendations for use

Cover the panels to protect them from direct sunshine and rain.

Seal the cut edges and machining made at site with paint suitable for exterior use.

Use good quality form oil.

Seal screw holes with silicone to prevent moisture absorption.

Clean the panels carefully after every use.

Handle panels with care to get maximum reuses possible.

QC of Plywood

Sampmax Construction attaches great importance to the maintenance of product quality. Each piece of plywood is supervised by specialized personnel from the selection of raw materials, the specifications of glue, the layout of the core board, the high-pressure laminating veneers, the laminating process, including the selection of the finished product. Before large packaging and loading cabinets, our inspectors will check every piece of plywood to ensure that all products and processes are 100% qualified.


Product detail pictures:

Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax detail pictures

Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax detail pictures

Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax detail pictures

Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax detail pictures


Related Product Guide:

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Factory Cheap Hot Wall Formwork System - Big Size Film Faced Plywood – Sampmax , The product will supply to all over the world, such as: Cyprus, Algeria, Hungary, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
  • Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Gail from French - 2017.01.28 18:53
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Mabel from Surabaya - 2018.07.27 12:26
    Write your message here and send it to us