Daidaitacce Scaffolding Screw Base Jack U Head Jack Base Plate don tsarin scaffolding
Scaffolding nauyi wajibi U head jack damar amintaccen amfani a kan m ƙasa da Base farantin iya samar da karin kwanciyar hankali.
Q235 zafi tsoma galvanized goyon bayan U kai ana amfani da su dunƙule jacks.Samfuri ne wanda ba makawa a cikin kowane tsarin zakka.Ana amfani da shi don daidaita matakin ƙwanƙwasa a ƙarƙashin yanayin ƙasa marar daidaituwa da siffar da ba ta dace ba.Ana amfani da shi don ayyukan gine-gine, gadoji, ramuka, da dai sauransu. Gine-ginen jama'a, da dai sauransu.
Jakin dunƙule jack, U-Head jack, da farantin gindi
Abubuwan ɓangarorin ɓangarorin ƙananan sassa ne da ake amfani da su don gyara tsarin ɓangarorin tare.A matsayin maɓalli mai mahimmanci na tsarin ɓangarorin, kayan aikin ɓangarorin dole ne su kasance samfuran ƙira na musamman waɗanda zasu iya tallafawa tsarin sikeli wanda zai iya kula da takamaiman aiki a ƙarƙashin yanayi daban-daban na damuwa.Gabaɗaya waɗannan sassan ana fuskantar gwaji mai tsauri yayin aikin samarwa don tabbatar da cewa za su iya kiyaye tasirin ɗaurewa da kyau a ƙarƙashin matsi na aikin ɓarna.A cikin samarwa, mukan yi amfani da gwajin nakasawa da gwajin juzu'i don kimanta daidaiton na'urorin haɗi.
Abubuwan da ake amfani da su na yau da kullun sun haɗa da haɗin haɗi, ma'aurata, jack ɗin dunƙulewa, jack ɗin U-Head, farantin tushe, matakala, allon tafiya, jack nut da wheel wheel, da sauransu.
A cikin wannan shafin muna gabatar da Screw Jack, U-head jack, da Base Plate.
Jakin tushe mai daidaitacce na ƙwanƙwasa na iya sanya ƙafafu masu ɗorewa a irin wannan matakin.Lokacin da ƙafafu na tsarin gyare-gyare suna a matakai daban-daban na farfajiya, jack ɗin tushe na iya daidaita matakan ƙafar ƙafafu.Wannan yana tabbatar da cewa wuraren da ke goyan bayan ɓangarorin suna da kusan daidai gwargwado a kan ginin hasumiya.
| Suna: | Screw jack |
| Raw Kayayyaki: | Q235 ya da Q345 |
| Tsawon: | 300/400/600/914/1524MM/Na musamman |
| Girman Jack: | 4 x38mm |
| Girman Tushe: | 150X150X5MM |
| Nauyi: | 3.0-8.0kg |
| Daidaito: | EN74/BS1139 |
| Maganin Sama: | HDG/E-Galvanized/Pre-Galvanized/Fada mai Rufe/Paint |
| Suna: | U-head jack/4-hanyoyin kai |
| Raw Kayayyaki: | Q235 ya da Q345 |
| Tsawon: | 200/280/600/760MM/Na musamman |
| Girman Jack na Hollow: | φ48X4.0mm/φ38X4.0mm |
| Girman kai: | 100x100x45x3.5mm/165x165x100x4mm ko Musamman |
| Nauyi: | 3.0-6.0kg |
| Daidaito: | EN74/BS1139 |
| Maganin Sama: | HDG/E-Galvanized/Pre-Galvanized/Fada mai Rufe/Paint |
| Suna: | Farantin gindi |
| Raw Kayayyaki: | Q235 ko Low Carbon Karfe |
| Girman Tube: | 38mmx100mm |
| Girman Faranti: | 150 x 150 x 6mm ko Musamman |
| Nauyi: | 1.0-3.0kg |
| Daidaito: | EN74/BS1139 |
| Maganin Sama: | Fanti/Zafi Narke Galvanized |
