Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax
Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax Detail:
Features
Size: 1250*2500
Thickness: 12mm 15mm 18mm
Core Veneer: Poplar Core, Eucalyptus Core, Combined
Face & Back: Phenolic Black Film, Phenolic Brown Film, Dynea Film
Glue: WBP/WBP Melamine/MR
Baseboard
Sampmax Construction Eucalyptus plywood made solely from eucalyptus veneers bonded together in a cross-banded construction.
Bonding
Phenolic resin cross-bonded weather-resistant gluing according to EN 314-2/class 3 exterior, EN636-3.
Surface
Sampmax FFP coating weight is 240g/m2 on both sides.
Face and reverse: Brown phenolic film combination (abt. RAL 8017).
Edge sealing: Water-resistant paint.
Thicknesses and weight
|
Nominal thickness (mm) |
Min. thickness (mm) |
Max. thickness (mm) |
Weight (kg/m2) |
|
15 |
11 |
14.5 |
15.2 |
|
18 |
13 |
17.5 |
18.5 |
|
21 |
15 |
20.5 |
21.5 |
Panel size
2400/2440/2500 x 1200/1220/1250 mm
Size limits
Size tolerances: < 1000 mm ± 1 mm
1000-2000 mm ± 2 mm
> 2000 mm ± 3 mm
Other information
The panel can have dimensional changes due to changes in air humidity.
End uses
Usage mainly for slab forms.
The typical number of reuses is likely to be about 6-10 times.
However, the number of reuses will depend on a wide range of factors including good site practice, the required concrete finish, careful handling & storage of forms, and the type and quality of release agent.
Data
Properties of Sampmax Poplar.
|
Property |
EN |
Unit |
Standard value |
Value of test |
|
Moisture content |
EN322 |
% |
6 -14 |
8.60 |
|
Number of plies |
- |
Ply |
- |
5-13 |
|
Density |
EN322 |
KG/M3 |
- |
550 |
|
Bonding Quality |
EN314-2/class3 |
Mpa |
≥0.70 |
Max: 1.85 Min: 1.02 |
|
Longitudinal Modulus of elasticity |
EN310 |
Mpa |
≥6000 |
7265 |
|
Lateral Modulus of elasticity |
EN310 |
Mpa |
≥4500 |
5105 |
|
Longitudinal Strength Bending N/mm2 |
EN310 |
Mpa |
≥45 |
63.5 |
|
Lateral Strength Bending N/mm2 |
EN310 |
Mpa |
≥30 |
50.6 |
Recommendations for use
Cover the panels to protect them from direct sunshine and rain.
Seal the cut edges and machining made at site with paint suitable for exterior use.
Use good quality form oil.
Seal screw holes with silicone to prevent moisture absorption.
Clean the panels carefully after every use.
Handle panels with care to get maximum reuses possible.
QC of Plywood
Sampmax Construction attaches great importance to the maintenance of product quality. Each piece of plywood is supervised by specialized personnel from the selection of raw materials, the specifications of glue, the layout of the core board, the high-pressure laminating veneers, the laminating process, including the selection of the finished product. Before large packaging and loading cabinets, our inspectors will check every piece of plywood to ensure that all products and processes are 100% qualified.
Product detail pictures:
Related Product Guide:
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Manufacturer for Concrete Wall Form Systems - Big Size Film Faced Plywood – Sampmax , The product will supply to all over the world, such as: Istanbul, Maldives, Bangladesh, With the spirit of "credit first, development through innovation, sincere cooperation and joint growth", our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our products in China!
By Prima from Lesotho - 2018.11.02 11:11
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Geraldine from Los Angeles - 2018.06.21 17:11
