Aluminum Beam made by 6061-T6 Aluminum Alloy

Used as a support member in slab and beam formwork, it can act as a primary (working as a ledger) a secondary (working as a joist), or both. Used as a secondary member (working as a stud vertically or horizontally) in the wall form application. It can also be used with plywood topping to replace timber planks to provide a working platform on the construction site.

Product Detail

Product Tags

Product: Aluminum Beam
Material: 6061-T6 Aluminum Alloy

Sampmax Aluminum Beam-6
Sampmax Aluminum Beam-4

Chemical Composition Analysis: ASTM E1251-17a (OES)

Element  Si Fe Cu Mn Mg Cr Zn Ti  Al
Result(%)  0.62 0.28  0.21 0.08 0.82 0.06 0.05 0.02 97.86

Mechanical Properties:

Items Tensile Strength Yield Strength Elongation Vickers Hardness
Result 310MPa 270MPa 10% 13


1. Long life, cost saving.
2. Light weight, high strength.
3. Waterproof, fireproof, corrosion resistance.
4. Environment friendly, no construction waste, high recycle value.


Sampmax Aluminum Beam-7
Sampmax Aluminum Beam-5

  • Previous:
  • Next:

  • Write your message here and send it to us